LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LUJ LUV) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coil Remover/Installer
    GM2579391Courtesy of GENERAL MOTORS COMPANY
  1. Install the EN-6009 remover/installer (1).
  2. Install the ignition coil assembly (2).
  3. Remove the EN-6009 remover/installer (1).
    4. Fig 2: Ignition Coil Wiring Harness Connector And Fasteners
    GM2508825Courtesy of GENERAL MOTORS COMPANY
  4. Install the 2 ignition coil assembly fasteners (2) and tighten to 8 (71 lb in).
  5. Connect the ignition coil plug (1).
  6. Install the engine cover. Refer to Refer to Engine Cover Replacement .
  7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals