LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Traverse LTZ, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the exhaust manifold lower heat shield. Refer to Exhaust Manifold Lower Heat Shield Replacement .
    Fig 1: Identifying Knock Sensor & Crankshaft Position (CKP) Sensor Electrical Connectors
    GM1860405Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the engine wiring harness electrical connector (3) from the crankshaft position (CKP) sensor (4).
  3. Remove the crankshaft sensor bolt.
    Fig 2: Identifying Crankshaft Position (CKP) Sensor
    GM1311144Courtesy of GENERAL MOTORS COMPANY
  4. Remove the crankshaft sensor.
scientia non olet · About LEMON Manuals