LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Traverse LTZ, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

NOTE:
  • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
  • Always route the replacement cable the same way as the original cable.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    Fig 1: Identifying Body Wiring Harness Connector & Negative Battery Cable Connector
    GM1860988Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the body wiring harness electrical connector (4) from the negative battery cable electrical connector (1).
  3. Remove the negative battery cable ground bolt (2). (battery shown removed for clarity).
    Fig 2: View Of Negative Battery Cable Ground Bolt
    GM1860989Courtesy of GENERAL MOTORS COMPANY
  4. Remove the negative battery cable.
scientia non olet · About LEMON Manuals