LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Traverse LTZ, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

  1. Position the negative battery cable to the battery box. (battery shown removed for clarity).
    Fig 1: View Of Negative Battery Cable Ground Bolt
    GM1860989Courtesy of GENERAL MOTORS COMPANY
  2. Install the negative battery cable ground bolt (2).
    CAUTION: Refer to Fastener Caution .

    Tighten 

    Tighten the bolt to 25 N.m (18 lb ft).

  3. Connect the body wiring harness electrical connector (4) to the negative battery cable electrical connector (1).
    Fig 2: Identifying Body Wiring Harness Connector & Negative Battery Cable Connector
    GM1860988Courtesy of GENERAL MOTORS COMPANY
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals