LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Traverse LTZ, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC B2495: Liftgate Latch Control Circuit (Manual Liftgate) >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the L/GATE relay.
  2. Connect a test lamp between the control circuit terminal 85 and ground.
  3. Command the liftgate latch assembly by pressing and releasing the exterior liftgate switch. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always OFF, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
    • If the test lamp is always ON, test the control circuit for a short to voltage. If the circuit tests normal, replace the BCM.
  4. If all circuits test normal, test or replace the L/GATE relay.
scientia non olet · About LEMON Manuals