Installation Procedure

Apply a few drops of clean engine oil to the male pipe end.

Fig 1: Oiling Male Pipe Ends (Metal Collar)
Courtesy of GENERAL MOTORS COMPANY

WARNING: Refer to Fuel Pipe Fitting Warning .
Push both sides of the fitting together in order to snap the retaining tabs into place.

Fig 2: View Of Connectors (Metal Collar)
Courtesy of GENERAL MOTORS COMPANY
Once installed, pull on both sides of the fitting in order to make sure the connection is secure.

Fig 3: Ensuring Connection (Metal Collar) Is Secure
Courtesy of GENERAL MOTORS COMPANY
Install the retainer to the quick-connect fitting.

Fig 4: View Of Quick-Connect Fitting Retainer (Metal Collar)
Courtesy of GENERAL MOTORS COMPANY