LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Traverse LS, 4D Utility >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Air Cleaner Outlet Duct Replacement >> Installation Procedure

Installation Procedure

  1. Loosely Install the air cleaner outlet duct then install the fuel injector sight shield to ensure proper clearance.
    Fig 1: View Of Air Cleaner Outlet Duct Clamps
    GM1860658Courtesy of GENERAL MOTORS COMPANY
  2. Remove the fuel injector sight shield.
  3. Tighten the air cleaner outlet duct clamps (1) to 4 N.m (35 lb in) at the MAF/IAT sensor and throttle body.
    CAUTION: Refer to Fastener Caution .
  4. Connect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 2: Identifying Fresh Air Tube & Related Components
    GM2065375Courtesy of GENERAL MOTORS COMPANY
  5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals