LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Traverse LS, 4D Utility >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
    Fig 1: Identifying Fresh Air Tube & Related Components
    GM2065375Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.
  4. Disconnect the windshield washer hose clip from the corner of the air cleaner housing.
  5. Loosen the air cleaner outlet duct clamp (1) at the throttle body.
    Fig 2: Identifying Air Cleaner Components
    GM1860603Courtesy of GENERAL MOTORS COMPANY
  6. Loosen the 6 air cleaner housing cover screws (2).
  7. Separate the air cleaner outlet duct from the throttle body.
  8. Remove the air cleaner housing cover (3) (with outlet duct).
  9. Remove and discard the air cleaner element (4).
scientia non olet · About LEMON Manuals