LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Tahoe SSV >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Diagnostic Information and Procedures >> DTC U1816: Lost Communication With Drive Motor Control Module "B" on Bus "B" >> Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC B137A is not current in the serial data gateway module (SDGM).
  2. Verify that DTC U1816 is not set current only in the HPCM.
    • If the DTC is current in the HPCM only, replace the drive motor power inverter module (PIM).
scientia non olet · About LEMON Manuals