LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Bumper Fascia
    GM2327692Courtesy of GENERAL MOTORS COMPANY
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect electrical connector from the rear object sensor.
  3. Rotate the housing counterclockwise and remove the rear object sensor.