LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Bumper Fascia
    GM2327692Courtesy of GENERAL MOTORS COMPANY
  1. Insert the sensor into the housing and lock the sensor by rotating the housing clockwise.
  2. Connect the electrical connector to the rear object sensor.
  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals