LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Lighting System) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower airbag bracket. Refer to .
    2. Fig 1: Intermediate Steering Shaft
    GM3239974Courtesy of GENERAL MOTORS COMPANY
  2. Remove the intermediate steering shaft (1). Refer to Intermediate Steering Shaft Replacement .
  3. Disconnect the brake pedal position sensor electrical connector.
    4. Fig 2: Brake Pedal Position Sensor Bracket Bolts
    GM3349689Courtesy of GENERAL MOTORS COMPANY
  4. Remove the brake pedal position sensor bracket bolts (1).
  5. Remove the brake pedal position sensor and bracket assembly.
    6. Fig 3: Brake Pedal Position Sensor Bolt
    GM3349690Courtesy of GENERAL MOTORS COMPANY
  6. Remove the brake pedal position sensor bolt (1).
  7. Remove the brake pedal position sensor (2) from the bracket.
scientia non olet · About LEMON Manuals