LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Spark LS, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Cooling System) >> Repair Instructions >> Water Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the coolant. Refer to Cooling System Draining and Filling .
  2. Remove the water pump and generator belt. Refer to Water Pump and Generator Belt Replacement .
  3. Remove the generator. Refer to Generator Replacement .
    4. Fig 1: Intake Manifold Support Bracket And Bolts
    GM2789297Courtesy of GENERAL MOTORS COMPANY
  4. Remove the intake manifold support bracket bolts (2, 3).
  5. Remove the intake manifold support bracket (1).
    6. Fig 2: Heater Outlet Hose And Clamp
    GM2753108Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the radiator surge tank outlet hose and clamp (1).
  7. Disconnect the heater outlet hose and clamp (2).
  8. Disconnect the water pipe hose and clamp (3).
    9. Fig 3: Water Pump Bolts
    GM2753113Courtesy of GENERAL MOTORS COMPANY
  9. Remove the 4 water pump bolts (1).
  10. Remove the water pump assembly (2) from the engine block.
  11. Remove the water pump oil seal ring.
scientia non olet · About LEMON Manuals