Disassembly Procedure
WARNING: This page is about a different car, the 2013 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the evaporative emission canister purge pipe (1).
- Disconnect the fuel tank recirculation pipe connector (2).
- Disconnect the fuel tank wiring harness (3) electrical connectors from the following:
- Fuel tank pump
- Fuel tank pressure sensor
- Evaporative emission canister solenoid valve
- Remove the fuel tank vent pipe (4).
- Remove the evaporative emission canister. Refer to Evaporative Emission Canister Replacement .
- Remove the fuel pump. Refer to Fuel Pump Replacement .
- Remove the fuel tank heat shield. Refer to Fuel Tank Heat Shield Replacement .