Circuit/System Verification
- Vehicle in Service Mode, verify no additional DTCs are set in other control modules.
- If additional DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no additional DTCs are set
- If additional DTCs are set
- Connect the drive motor battery charger cable to household power outlet, but not the battery charger receptacle.
- After 25 seconds, verify drive motor battery charger cable LEDs illuminate solid green.
- If drive motor battery charger cable LEDs do not illuminate solid green
- Connect a known good drive motor battery charger cable to the same household power outlet.
- If known good drive motor battery charger cable LEDs illuminate solid green, have the service provider check for high frequency noise on the dedicated home outlet. If no high frequency noise is found, replace drive motor battery charger cable.
- If known good drive motor battery charger cable LEDs do not illuminate solid green, have the service provider inspect the household power outlet for insufficient voltage, high frequency noise or open/high resistance.
- If drive motor battery charger cable LEDs do illuminate solid green
- Refer to Circuit/System Testing.