LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Sonic RS, 4D Sedan, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Lighting System) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement (Without AAL) , Instrument Panel Lower Trim Pad Cover Replacement (With AAL) .
    2. Fig 1: Brake Pedal Position Sensor Bolt
    GM2511817Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the brake pedal position sensor electrical connector.
  3. Remove the brake pedal position sensor bolt (1).
  4. Remove the brake pedal position sensor.
scientia non olet · About LEMON Manuals