LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Sonic RS, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. Disconnect the electronic brake control module (EBCM) electrical connector.
    3. Fig 1: Electronic Brake Control Module Bolts
    GM2535377Courtesy of GENERAL MOTORS COMPANY
  3. Remove the EBCM bolts (1),
    4. Fig 2: Electronic Brake Control Module
    GM2535378Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not pry the components apart.
  4. Carefully separate the EBCM (1) from the BPMV.
  5. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
scientia non olet · About LEMON Manuals