LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> SS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Cooling System >> Repair Instructions >> Transmission Fluid Cooler Inlet Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Transmission Fluid Cooler Inlet Pipe
    GM3238820Courtesy of GENERAL MOTORS COMPANY
  1. Connect the transmission fluid cooler inlet pipe (1) to the radiator (2).
  2. Install the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement .
  3. Lower the vehicle.
    4. Fig 2: Transmission Fluid Cooler Pipes
    GM3228218Courtesy of GENERAL MOTORS COMPANY
  4. Connect the transmission fluid cooler inlet pipe (1) to the transmission fluid cooler pipes (2).
  5. Install the air cleaner outlet extension. Refer to Air Cleaner Outlet Duct Replacement .
  6. Adjust the transmission fluid level. Refer to Transmission Fluid Level and Condition Check , and transmission fluid fill procedure Transmission Fluid Fill Procedure .
  7. Inspect for fluid leaks.
scientia non olet · About LEMON Manuals