Radio Control Assembly Replacement

Fig 1: Radio Control Assembly & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel center trim panel applique. Refer to Instrument Panel Center Trim Plate Applique Replacement . Remove the instrument panel trim plate applique - left side. Refer to Instrument Panel Trim Plate Applique Replacement - Left Side .
1	Radio Control Assembly Fasteners (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Radio Control Assembly Procedure Using a plastic trim tool, release the surround clips evenly and pull away from the instrument panel. Disconnect the electrical connections. When replacing the radio control assembly, transfer all necessary components. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel center trim panel applique. Refer to Instrument Panel Center Trim Plate Applique Replacement .
Remove the instrument panel trim plate applique - left side. Refer to Instrument Panel Trim Plate Applique Replacement - Left Side .

Radio Control Assembly Fasteners (Qty: 2)

CAUTION:

Tighten
2.5 N.m (22 lb in)

Radio Control Assembly

Procedure

Using a plastic trim tool, release the surround clips evenly and pull away from the instrument panel.
Disconnect the electrical connections.
When replacing the radio control assembly, transfer all necessary components.
Refer to Control Module References for programming and setup information.