Inside Rearview Mirror Replacement

Fig 1: Identifying Inside Rearview Mirror

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the windshield outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement .
1	Inside Rearview Mirror CAUTION: Refer to Fastener Caution . Procedure Disconnect the electrical connector. Adjust the mirror to the full upward position. Loosen the set screw located at the base of the mirror. Slide the mirror upward off of the rearview mirror button. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedures
Remove the windshield outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement .

Inside Rearview Mirror

CAUTION:

Procedure