Circuit/System Verification
WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify that DTC B0967 02 is not set.
- If the DTC is set
Refer to Parking Assist Switch Malfunction .
- If the DTC is not set
- If the DTC is set
- Verify that B0968 01 or B0968 06 is not set.
- If the DTC is set
Refer to Parking Assist Switch Indicator Malfunction .
- If the DTC is not set
- If the DTC is set
- Verify parking assist indicator turns on and off when commanding the Parking Assist Switch LED parameter On and Off with a scan tool.
- If the LED does not turn On and Off
refer to Circuit/System testing (below) - Parking Assist Switch Indicator Malfunction .
- If the LED turns On and Off
- If the LED does not turn On and Off
- Activate and deactivate the parking assist switch and verify the scan tool Park Assist Switch parameter changes between Active and Inactive.
- If the Parking Assist Switch parameter does not change between Active and Inactive
refer to Circuit/System testing (below) - Parking Assist Switch Malfunction .
- If the Parking Assist Switch parameter changes between Active and Inactive
- If the Parking Assist Switch parameter does not change between Active and Inactive
- All OK.