LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Impala Limited LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Antilock Brake System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EBTCM assembly to the bracket.
    2. Fig 1: BPMV Assembly Bracket Bolts
    GM2739969Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the EBTCM assembly bracket bolt (1) and tighten to 10 (89 lb in).
  3. Install the EBTCM assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
scientia non olet · About LEMON Manuals