Removal Procedure
- Remove the rear upper quarter trim panel. Refer to Quarter Upper Trim Panel Replacement .
- Disconnect the antenna cable (1) from the radio antenna module (2).
- Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Impala) .
- Remove the rear seat back. Refer to Rear Seat Back Cushion Removal and Installation (Impala) .
- Remove the right carpet retainers. Refer to Front Side Door Opening Floor Carpet Retainer Replacement (Impala) .
- Remove the right lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
- Adjust the carpet for access to the antenna cable as required.
- Disconnect the antenna cable (1) from the antenna extension cable (2).
- Cut off the visible end of the antenna cable from the wiring harness in the following locations:
- The kick panel area
- The rear shelf area