LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Impala Limited LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Object Detection System And Pedestrian Protection System) >> Diagnostic Information and Procedures >> DTC B356A: Vehicle Direction Warning Switch >> Component Test

Component Test

WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Static Test

  1. Ignition OFF, disconnect the harness connector at the S48A Multifunction Switch - Instrument Panel.
  2. Test for infinite resistance between the control circuit terminal 10 and ground circuit terminal 2.
    • If less than infinite resistance 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If infinite resistance 
  3. Test for less than 10 Ω between the control circuit terminal 10 and ground circuit terminal 2 while pressing the lane departure warning switch.
    • If 10 Ω or greater 

      Replace the S48A Multifunction Switch - Instrument Panel.

    • If less than 10 Ω 
  4. All OK.