Fastener Tightening Specifications
WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Power Steering Assist Motor Bolt (NJ1 Only) (1) | 8 N.m | 71 lb in |
| Steering Gear Bolt (1) | ||
|
110 N.m | 81 lb ft |
|
150 Degrees | |
| Steering Gear Heat Shield Fastener | 9 N.m | 80 lb in |
| Steering Gear Wiring Harness Bracket Bolt | 9 N.m | 80 lb in |
| Steering Linkage Inner Tie Rod | 100 N.m | 74 lb ft |
| Steering Linkage Inner Tie Rod Nut | 60 N.m | 44 lb ft |
| Steering Linkage Outer Tie Rod Nut | ||
|
35 N.m | 26 lb ft |
|
30 Degrees | |
| 1. Torque-to-yield fastener in use, requires NEW bolt. | ||