Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
CAUTION:
To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.
- Remove the electronic brake and traction control module (EBTCM) assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
- Remove the EBTCM assembly bracket bolt (1).
- Carefully separate the EBTCM assembly from the bracket.