Rear Side Door Window Replacement
Courtesy of GENERAL MOTORS COMPANY Rear Side Door Window Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the rear side door trim. Refer to Rear Side Door Trim Replacement
.
- Remove the rear side door inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
- Remove the rear side door belt reveal molding. Refer to Rear Side Door Window Belt Reveal Molding Replacement
- Remove the rear side door window rear channel. Refer to Rear Side Door Window Rear Channel Replacement .
|
| 1 |
Rear Side Door Window Guide Retainer Clip Procedure
- Apply masking tape to the both appliques and frame.
- Position the window approximately half way down in the door.
- Remove the armrest bracket.
- Remove the rear door water deflector.
- Use a suitable tool, push inward on the window guide retainer clip, lift upward on the window until it releases from the retaining clip.
- Tilt the window downward in the rear, pull up on the back of the window and pull it out from the frame.
|
| 2 |
Rear Side Door Window Procedure Place the window into the door frame, slide the window downward locking the retainers into the window retaining hole.
NOTE:
Inspect the window for proper operation before installing the trim.
|