LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Impala Eco >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LKW) >> Installation Procedure

Installation Procedure

    Fig 1: Starter Mounting Fasteners And Starter
    GM2814022Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the starter (1) and torque the top fastener (2) to 22 (16 lb ft), then torque the bottom fastener (2) to 22 (16 lb ft).
    2. Fig 2: Battery Positive Cable Terminal And Engine Harness Connector
    GM2814017Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery positive cable terminal (1) to the starter solenoid and tighten the fastener (2) to 10 (89 lb in).
  3. Install the engine wiring harness connector (3) to the starter solenoid.
  4. Install the secondary air injection pump, if equipped. Refer to Secondary Air Injection Pump Replacement .
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals