Circuit/System Verification

Ignition ON.
Verify that DTC B356A is not set.
- If the DTC is set
  Refer to DTC B356A .
- If the DTC is not set
Verify that DTC B0987 is not set.
- If the DTC is set
  Refer to DTC B0987 .
- If the DTC is not set
Verify the scan tool Frontview Camera System Status parameter is Normal.
- If the parameter is Undefined or Malfunction
  Refer to Diagnostic Aids .
- If the parameter is Normal
Verify the scan tool Lane Departure Warning Switch Status parameter changes between ON and OFF when pressing the lane departure warning switch.
- If the parameter does not change between On and Off
  refer to Circuit/System testing (below) - Lane Departure Warning Switch Malfunction .
- If the parameter changes between On and Off
Verify the scan tool Lane Departure Warning Indicator Status parameter changes change between On and Off when pressing the lane departure warning switch.
- If the parameter does not change between On and Off
  refer to Circuit/System testing (below) - Lane Departure Warning Switch Indicator Malfunction .
- If the parameter changes between On and Off
All OK.