LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, RWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle >> Disassembly Procedure

Disassembly Procedure

    Fig 1: View Of Power Steering Pump Control Valve Assembly
    GM580317Courtesy of GENERAL MOTORS COMPANY
  1. Drain the power steering fluid from the power steering pump housing (1).
  2. Remove the connector and fitting assembly (2).
  3. Remove the control valve assembly (4) from the pump housing. Ensure the flow control spring (5) does not fall out of the pump housing.
  4. Remove the O-ring seal (3) from the connector and fitting assembly.

    Discard the O-ring seal.

scientia non olet · About LEMON Manuals