Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Brake Hose Bracket to Steering Knuckle Bolt	10 N.m	88 lb in
Brake Hose Bracket to Upper Control Arm Bolt	10 N.m	88 lb in
Hub and Bearing to Steering Knuckle Mounting Bolts	180 N.m	133 lb ft
Lower Ball Joint Retaining Nut	100 N.m	74 lb ft
Lower Control Arm to Frame Mounting Nuts
W/O 14050/12300GVW	155 N.m	114 lb ft
With 14050/12300GVW	120 N.m + 175°	89 lb ft + 175°
With Diesel Engine	120 N.m + 175°	89 lb ft + 175°
Outer Tie Rod Retaining Nut	63 N.m	47 lb ft
Shock Absorber Lower Retaining Bolts
Rear Wheel Drive	25 N.m	18 lb ft
4 Wheel Drive	80 N.m	59 lb ft
Shock Absorber Upper Retaining Nut	22 N.m	16 lb ft
Stabilizer Shaft Insulator Clamp
2WD and 4WD 1500 and 4WD 2500 Series W/7300 GVW Bolts	25 N.m	18 lb ft
2WD 2500 Series W/8500/8600 GVW and 3500 Series Nuts	46 N.m	34 lb ft
2WD 2500 Series W/8500/8600 GVW and 3500 Series Bolts	50 N.m	37 lb ft
Stabilizer Shaft Link Bolt	11 N.m	97 lb in
Torsion Bar Support Mounting Bolts	95 N.m	70 lb ft
Upper Ball Joint Retaining Nut	50 N.m	37 lb ft
Upper Control Arm Mounting Nuts	175 N.m	129 lb ft
Wheel Drive Shaft Nut	210 N.m	155 lb ft
Wheel Speed Sensor Retaining Bolt	18 N.m	13 lb ft