Installation Procedure
- Install the lower control arm.
- Connect the lower ball joint to the steering knuckle.
- Install the new lower ball joint retaining nut and tighten to 100 N.m (74 lb ft).
- Install the front coil spring. Refer to Front Spring Replacement .
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel) , Tire and Wheel Removal and Installation (8-Lug Wheel) .
- Lower the vehicle.
- Check the wheel alignment. Refer to Wheel Alignment Measurement .
CAUTION:
Refer to Fastener Caution .