Circuit/System Verification (Object Detection System And Pedestrian Protection System)
- Ignition ON.
- Verify that DTC B1405 is not set.
- If the DTC is set
Refer to DTC B1405
- If the DTC is not set
- If the DTC is set
- Verify that DTC B0958 01, B0959 01, B0960 01, B0961 01, B0958 21, B0959 21, B0960 21 or B0961 21 is not set.
- If the DTC is set
- Check the B78 Rear Object Sensor for contamination with snow, mud, dirt, slush or ice.
- If contaminated, clean sensor.
- If there is no contamination
- Refer to Circuit/System Testing.
- If the DTC is not set
- Verify that DTC B0958 3A, B0959 3A, B0960 3A or B0961 3A is not set.
- If the DTC is set
Replace the B78 Rear Object Sensor with the correct sensor type.
- If the DTC is set
- Ignition ON, engine running, transmission in REVERSE.
- Verify the scan tool Parking Assist System Status parameter displays Enabled.
- If the Parking Assist System displays Disabled
Refer to Circuit/System Testing.
- If the Parking Assist System displays Enabled
- If the Parking Assist System displays Disabled
- All OK.