LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Disconnectting Fuel Feed Pipe And Fuel Feed Pipe Connector
    GM2028100Courtesy of GENERAL MOTORS COMPANY
  1. Install and position the fuel feed pipe (3) to the vehicle.
  2. Clip in the fuel feed pipe (3) to the rear bracket clip (2).
  3. Remove the EN-6015  plugs from all connections.
  4. Connect the fuel feed pipe (3) to the fuel feed pipe connector (1). Refer to Plastic Collar Quick Connect Fitting Service .
    5. Fig 2: Fuel Feed Pipe And Clips
    GM2191622Courtesy of GENERAL MOTORS COMPANY
  5. Install the lower bulk head clip.
  6. Close the 4 fuel pipe clips (2).
    7. Fig 3: Front Exhaust Hanger Bracket And Bolt
    GM2538049Courtesy of GENERAL MOTORS COMPANY
  7. Rotate the right frame reinforcement to its original position.
  8. Install the exhaust front hanger bracket bolt (3).
  9. Install the frame reinforcement bolt (2).
    10. CAUTION:

    Refer to Fastener Caution .

  10. Tighten the NEW exhaust front hanger bracket bolt (3) to 22 N.m (16 lb ft).
  11. Tighten the NEW frame reinforcement bolt (2) to 60 N.m (44 lb ft).
  12. Tighten the drivetrain and front suspension frame bolt (1) to 160 N.m (118 lb ft).
  13. Lower the vehicle.
    14. Fig 4: Fuel Feed Pipe Clamp And Fuel Injection Fuel Pump
    GM2190463Courtesy of GENERAL MOTORS COMPANY
  14. Reposition the fuel feed pipe (3) and clip to the upper bulk head clip (4).
  15. Remove the EN-6015  plugs from all connections.
  16. Remove the EN-6368  plugs from the fuel injection pump.
  17. Connect the fuel feed pipe (3) to the fuel injection pump (1).
  18. Reposition the fuel feed pipe clamp by using the GE-47622  hose clamp pliers.
  19. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
  20. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals