LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Cruze Diesel >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Glow Plug Control Module Replacement >> Removal Procedure

Removal Procedure

  1. If equipped, remove the battery cover.
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    3. Fig 1: Glow Plug Control Module
    GM3459197Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the 2 wiring harness plugs (4).
  4. Remove the glow plug control module nut (1).
  5. Pull the module forward at the top and slide upward out of the glow plug control module bracket.
scientia non olet · About LEMON Manuals