Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Fig 1: Identifying Inner Tie Rod Assembly & Jam Nut

GM192067

Courtesy of GENERAL MOTORS COMPANY

Loosen the jam nut on the tie rod (2).
Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications .

CAUTION:

Refer to Fastener Caution .

Tighten the jam nut on the tie rod. Tighten the front tie rod jam nut to 75 N.m (55 lb ft).
Check the toe setting after tightening.
Adjust the toe setting if necessary.