Front Caster and Camber Adjustment

Fig 1: Rotating Cam Bolts In Lower Control Arm (Front Adjustment)

GM190738

Courtesy of GENERAL MOTORS COMPANY

Loosen the lower control arm cam bolt nuts.
Rotate the cam bolts to the required caster or camber specification setting. Refer to Wheel Alignment Specifications .

CAUTION:

Refer to Fastener Caution .

Maintain the caster or camber setting while tightening the cam bolt nuts. Tighten the front lower control arm cam bolt nuts to 170 N.m (125 lb ft).

NOTE:

Check the toe setting AFTER changing camber or caster.

Check the caster and camber settings after tightening.
Adjust the caster and camber setting if necessary.