Ignition Lock Cylinder Bulb Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Captiva Sport. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ignition Lock Cylinder Bulb

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .
1	Key Hole Lamp Retaining Screw CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb ft)
2	Ignition Key Alarm Switch Assembly Procedure Disconnect the electrical connectors. Twist to release the key hole lamp bulb.

Callout

Component Name

Preliminary Procedure
Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .

Key Hole Lamp Retaining Screw

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb ft)

Ignition Key Alarm Switch Assembly

Procedure

Disconnect the electrical connectors.
Twist to release the key hole lamp bulb.