LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Captiva Sport LS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LFW) >> Installation Procedure

Installation Procedure

    Fig 1: Idler Pulley Bolt And Generator
    GM2196009Courtesy of GENERAL MOTORS COMPANY
  1. Position the generator (4) to the engine.
  2. Loosely install the generator bolts (3).
  3. Install the idler pulley. Refer to appropriate service information.
    4. CAUTION:

    Refer to Fastener Caution .

  4. Tighten the generator bolts to 50 N.m (37 lb ft).
    5. Fig 2: Identifying Generator, Electrical Harness Connector & Nut
    GM2196013Courtesy of GENERAL MOTORS COMPANY
  5. Install the drive belt. Refer to appropriate service information.
  6. Connect the engine harness electrical connector (1) to the generator.
  7. Install the positive battery cable terminal (3) to the generator.
  8. Install the positive battery cable nut (2) at the generator and tighten to 20 N.m (15 lb ft).
  9. Position the positive battery cable boot at the generator terminal.
  10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals