Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel
Courtesy of GENERAL MOTORS COMPANY Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel
| Callout |
Component Name |
|
Preliminary Procedure
- Remove driver side windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement
- Remove remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement
|
| 1 |
Remote Control Door Lock Receiver Assembly |
| 2 |
Ignition Lock Key Transmitter Antenna Assembly Procedure
- Unclip antenna lower retainer from wire harness.
- Unclip upper antenna from windshield pillar.
- Attach mechanics wire to top of antenna. Pull antenna and wire through bottom of IP.
|