LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro ZL1, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L, Or 7.0L - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement

Fuel Pressure Sensor Replacement

Fig 1: Fuel Pressure Sensor (With Tee Fitting)
GM2750061Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to Safety Glasses Warning .

WARNING:

Refer to Relieving Fuel Pressure Warning .

Preliminary Procedures

  1. Relieve the fuel pressure. Refer to Fuel Pressure Relief .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1 Fuel Pressure Sensor

Procedure

  1. Disconnect the electrical connector.
  2. Release the fuel pressure sensor from the retaining bracket.
  3. Remove the fuel pressure sensor from the tee fitting.
  4. Inspect the rubber O-ring seal and replace as necessary.

Tighten 
15 N.m (11 lb ft)