LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Wheel Stud
    GM161272Courtesy of GENERAL MOTORS COMPANY
  1. Install the new stud from the back side of the hub.
  2. Install flat washers on the wheel stud.
    3. NOTE:

    Ensure that the wheel stud is fully seated against the wheel hub flange.

  3. With the flat side of a wheel nut against the washers, tighten the wheel nut until the wheel stud head seats against the wheel hub flange.
  4. Install the brake rotor. Refer to Front Brake Rotor Replacement .
  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals