LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake >> Installation Procedure

Installation Procedure

    Fig 1: Identifying CMP Sensor To Engine Front Cover Retaining Bolt
    GM1949769Courtesy of GENERAL MOTORS COMPANY
  1. Install the CMP sensor (2) to the engine front cover.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the CMP sensor to engine front cover retaining bolt (1) and tighten to 10 N.m (89 lb in).
    3. Fig 2: Identifying CMP Sensor Electrical Connector
    GM1949767Courtesy of GENERAL MOTORS COMPANY
  3. Install the CMP sensor electrical connector (1) to the CMP sensor.
  4. Reposition the vacuum brake booster hose.
  5. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front .
scientia non olet · About LEMON Manuals