LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Front Side Door Window Regulator Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector.
  3. Remove the door window switch from the door trim panel. Refer to Front Side Door Window Switch Replacement .

    Reinstall the window switch to the door harness this will allow you to operate the door window.

    4. Fig 1: Outer Reveal Belt Seal & Mirror Patch
    GM2326044Courtesy of GENERAL MOTORS COMPANY
  4. Locate the outer reveal belt seal (1) and mirror patch (2), mark the window (3) in 3 places for the initial window position before adjustments are performed. These marks will aid in positioning the window to the desired location during adjustment.
    5. WARNING:

    Refer to Glass and Sheet Metal Handling Warning .

  5. Remove the front side door window. Refer to Front Side Door Window Replacement .
  6. Mark all locations of the bolts/nuts and the window when removing the regulator. To ensure proper alignment when installing the window regulator later.
    1. Rear rail lower nut
    2. Front rail lower nut
    7. Fig 2: Front Side Door Window Regulator Components
    GM2326045Courtesy of GENERAL MOTORS COMPANY
  7. Remove the front side door window regulator cable retainers (1).
  8. Remove the front side door window regulator nut covers (2) located at the bottom of the door.
  9. Remove the front side door window regulator lower nuts (3) located at the bottom of the door.
  10. Remove The front side door window regulator upper nuts (4).
  11. Remove the front side door window regulator motor bolt (5).
  12. Disconnect the electrical from the motor.
  13. Remove the window regulator from the door.
scientia non olet · About LEMON Manuals