K9 Body Control Module X2
WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
|
K9 Body Control Module X2
| Pin | Size | Color | Circuit | Function | Option |
|---|---|---|---|---|---|
| 1 | 0.75 | RD/BN | 4240 | Battery Positive Voltage | - |
| 2 | 1.5 | BK | 2150 | Ground | - |
| 3 | 0.75 | RD/VT | 4640 | Battery Positive Voltage | - |
| 4 | 1 | RD/BN | 4940 | Battery Positive Voltage | - |
| 5-6 | - | - | - | Not Used | - |
| 7 | 0.35 | L-BU/YE | 5361 | Brake Apply Sensor Signal | - |
| 8 | 0.5 | YE | 6817 | LED Backlight Dimming Control | - |
| 9 | 0.35 | YE/GY | 44 | Instrument Panel Lamp Dimmer Switch Signal | - |
| 10 | 0.5 | WH/L-BU | 278 | Ambient Light Sensor Signal | - |
| 11-12 | - | - | - | Not Used | - |
| 13 | 0.35 | WH | 5359 | Brake Apply Sensor Supply Voltage | - |
| 14 | - | - | - | Not Used | - |
| 15 | 0.5 | BN/WH | 781 | Driver Door Lock Switch Unlock Signal | - |
| 16 | 0.5 | GY | 3273 | Remote Function Actuator Return | - |
| 17 | 0.35 | L-BU/L-GN | 5723 | Ignition Mode Switch Mode Voltage | - |
| 18 | - | - | - | Not Used | - |
| 19 | 0.5 | BN/YE | 780 | Driver Door Lock Switch Lock Signal | - |
| 20 | - | - | - | Not Used | - |
| 21 | 0.5 | L-GN/GY | 6135 | Linear Interconnect Network Bus 4 | - |
| 22 | 0.5 | L-GN | 5060 | Low Speed GMLAN Serial Data | - |
| 23-24 | - | - | - | Not Used | - |
| 25 | 0.5 | GY/WH | 3272 | Remote Function Actuator Supply Voltage | - |
| 26 | 0.5 | L-GN/WH | 111 | Hazard Switch Signal | - |
| 27 | 0.5 | YE/L-GN | 3274 | Remote Function Actuator Transmit Signal | - |