T6 Power Inverter Module Assembly X2

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS CORP.

Connector Part Information

Harness Type: Engine
OEM Connector: HPSPB-40C12-AK
Service Connector: 13577547
Description: 40-Way F 0.64 Series, Sealed (BK)

Terminal Part Information

Pins: 1, 5, 11, 19, 35
Terminated Lead: 13575867
Release Tool: J-38125-215A
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SAIT-A03T-M064/14
Core/Insulation Crimp: P/P

Pins: 8-10, 15-18
Terminated Lead: Pending
Release Tool: J-38125-215A
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: Pending
Core/Insulation Crimp: Pending

T6 Power Inverter Module Assembly X2

Pin	Size	Color	Circuit	Function	Option
1	0.5	GY/L-BU	3336	High Voltage Battery Pack Traction Power Inverter Module Contactor Status	-
2-4	-	-	-	Not Used	-
5	0.5	L-GN	6271	Crankshaft 60X Sensor Signal	-
6-7	-	-	-	Not Used	-
8	0.75	VT	3493	Transmission IMS Mode Switch S bit Signal	-
9	0.75	BN	3496	Transmission IMS Mode Switch D1 bit Signal	-
10	0.75	YE/BK	3494	Transmission IMS Mode Switch R1 bit Signal	-
11	0.5	L-BU/WH	3977	Accessory Wakup Serial Data 2	-
12-14	-	-	-	Not Used	-
15	0.75	YE/RD	1673	12 Volt Reference	-
16	0.75	BK/WH	551	Signal Ground	-
17	0.75	L-GN/BN	3497	Transmission IMS Mode Switch D2 bit Signal	-
18	0.75	GY	3495	Transmission IMS Mode Switch R2 bit Signal	-
19	0.5	VT/BK	339	Run/Crank Ignition 1 Voltage	-
20-34	-	-	-	Not Used	-
35	0.5	RD/YE	240	Battery Positive Voltage	-
36-40	-	-	-	Not Used	-