LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Volt >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System - DTC B1000 To DTC U1846 >> Diagnostic Information and Procedures >> DTC P1F06-P1F09 >> Circuit/System Verification

Circuit/System Verification

WARNING:

The Volt Battery Pack will utilize an exchange program. Please consult the most recent revision of bulletin/PI #PIP4841, available in Service Information (SI), for a list of approved Volt Battery Pack service procedures. Components that may be removed and serviced without exchanging the complete battery pack are identified in the bulletin/PI. Please contact the GM Technical Assistance Center if you have any questions.

  1. Vehicle in Service Mode.
  2. Verify that DTC P1F06, P1F07, P1F08, or P1F09 is not set.
    • If DTC P1F06 is set 

      Replace the K112A Hybrid/EV Battery Interface Control Module 1.

    • If DTC P1F07 is set 

      Replace the K112B Hybrid/EV Battery Interface Control Module 2.

    • If DTC P1F08 is set 

      Replace the K112C Hybrid/EV Battery Interface Control Module 3.

    • If DTC P1F09 is set 

      Replace the K112D Hybrid/EV Battery Interface Control Module 4.

    • If all DTCs P1F06, P1F07, P1F08, and P1F09 are set together 

      Replace the K16 Battery Energy Control Module.

    • If none of the DTCs are set 
  3. All OK
scientia non olet · About LEMON Manuals