Removal Procedure
- Remove the rear floor stowage compartment. Refer to Rear Compartment Floor Stowage Trim Compartment Replacement .
- Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the battery positive cable fuse block nut (1) and terminal (2) from the battery fuse block.
- Remove the quarter inner trim finish panel. Refer to Quarter Inner Trim Finish Panel Replacement .
- Separate the battery positive cable from the body harness, while working from the rear compartment towards the passenger compartment.
- Remove the rear side door floor covering retainer. Refer to Rear Side Door Opening Floor Carpet Retainer Replacement
- Detach the battery positive cable (1) from the rear passenger compartment.
- Remove the interior trim panels (1). Refer to Center Pillar Trim Panel Replacement , and Front Side Door Opening Floor Carpet Retainer Replacement .
- Remove the battery positive cable (2) from the left rocker channel.
- Detach the battery positive terminal (2), from the engine wiring junction block (3), with the nut (1).
- Pull the battery positive cable (2) through the harness grommet (1).
- Remove the battery positive cable from the vehicle.