Remote Start

The remote start function allows an operator to pre-condition the vehicle interior prior to entering the vehicle. Remote start will allow the HVAC system and other vehicle systems to enable, providing a comfortable vehicle upon entry. Remote start functions have an operating range of up to 195 feet, depending on conditions. The remote start sequence begins by pressing and releasing the lock button and then pressing and holding the remote start buttons on the keyless entry transmitter. The turn signal lamps will illuminate to indicate the vehicle has received the remote start request. Each time a remote start is performed, the vehicle doors are locked, however they may then be unlocked/locked with the transmitter or vehicle key at any time. Once activated, the HVAC and vehicle systems are allowed to operate for 10 minutes. The remote start time may be extended by an additional 10 minute by again pressing and releasing the lock button and then pressing and holding the remote start buttons on the transmitter. This feature is called a remote start continue and allows a maximum of 20 minutes of system operation. If the remote start continue is performed at 7 minutes into the initial 10 minute time-out, a total of 17 minutes of systems operation would occur. The remote start event may be suspended at any time by pressing only the remote start button on the transmitter or by entering the vehicle and turning ON the hazard lamps.

In between ignition cycles, only two remote start events may occur or be attempted. Once two events or attempts have been made, future remote start events will be suspended until the vehicle is operated using the ignition mode switch.