LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LUV) >> Installation Procedure

Installation Procedure

    Fig 1: Generator And Mounting Fasteners
    GM2777172Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator (1) from above.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 2 generator mounting fasteners (2) and tighten to 35 N.m (26 lb ft).
    3. Fig 2: Generator, Cables And Fasteners
    GM2777174Courtesy of GENERAL MOTORS COMPANY
  3. Connect the generator wiring harness connector (4).
  4. Install the generator positive cable (3) and tighten the fastener (2) to 17 N.m (13 lb ft).
  5. Install the protective boot (1).
  6. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  7. Install the drivetrain and front suspension frame transmission protector. Refer to Drivetrain and Front Suspension Frame Transmission Protector Replacement .
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals